Differences

This shows you the differences between two versions of the page.

--- sd:tinyc_developer_diary [2026/04/22 09:34] – appledog
+++ sd:tinyc_developer_diary [2026/04/22 17:14] (current) – appledog
@@ Line 829: / Line 829: @@
 . In parse function, emit_call, anything to do with backpatching, etc. we need to make sure we are using a three byte value.
+. Anything which touches HERE or offset 18 of the symbol table. This is an easy search for ex. LDA [@HERE].
 It took a couple of hours. As I ran through various tests it struck me that there are a series of tests I went through a couple of times before to verify things work. As I ran through them again I had the insight to write them down.
-=== C Test programs
+=== TinyC Test programs
 These provide the test cases I used to check my compiler. In order.
-=== First
+==== First
+<code>
 int main(void) { return 0; }
+</code>
-=== Symbol table
+==== Symbol table
+<code>
 int main(void) { int a = 5; return a; }
+</code>
-=== Globals
+bit:
+<code>
+.clear
+int main(void) {
+    int a = 0x123456;
+    return a;
+}
+.compile
+.run
+</code>
+==== Globals
 We can't define them when we make them. It seems like I did something wrong here but I don't know how to fix it. Just define them in main. Whoop de doo.
+<code>
 int g;
 int main(void) {
@@ Line 849: / Line 867: @@
     return g;
 }
+</code>
-=== Forward Declarations
+==== function call
-Single and Multiple:
+<code>
+int a(int x) { return x + 1; }
+int main(void) { return a(41); }
+</code>
-    int helper(int x);
+two arguments:
-    int main(void) { return helper(41); }
-    int helper(int x) { return x + 1; }
-    int helper();
+<code>
-    int main(void) {
+.clear
-        return helper() + helper();
+int add(int a, int b) { return a + b; }
-    }
+int main(void) { return add(20, 22); }
-    int helper() { return 5; }
+.compile
+.run
+</code>
+==== Forward Declarations
+Single
+<code>
+int a(int x);
+int main(void) { return a(41); }
+int helper(int x) { return x + 1; }
+</code>
+multiple
+<code>
+int a();
+int main(void) {
+    return a() + a();
+}
+int a() { return 5; }
+</code>
+==== Recursion
+<code>
+int even(int n);
+int odd(int n);
+int even(int n) { if (n == 0) { return 1; } return odd(n - 1); }
+int odd(int n) { if (n == 0) { return 0; } return even(n - 1); }
+int main(void) { return even(10); }
+</code>
+==== Built-in functions
+<code>
+int main(void) {
+    putchar('h');
+    putchar('i');
+    return 0;
+}
+</code>
-=== Recursion
+=== Re-wiring pointers
-    int  even(int n);
+Unfortunately the changes were far more in depth than I expected, and I had to spend an additional ten hours going over the code to fix pointers, the lexer, and everything in between. Oh, and yet more emitters I forgot needed to be changed. Even the REPL itself didn't print out the full return value. This makes me reconsider my choice to go with a 16 bit system. Should the SD-8516 have been 32 bit? Maybe, maybe not. In the end, it works. A 16 bit system can run a 32 bit c, no problem. I mean, look at Commodore BASIC 2.0. It used floats for ints. Steve Wozniak even made a Sweet-16 so that it could use 16 bit registers. We can do 32 bit in the languages. No problem. We are not going to get any practical advantage from going 32 bit internal since we're running on WASM which is 64 bit native anyways. See? We can have our cake and eat it too here.
-    int odd(int n);
-    int even(int n) { if (n == 0) { return 1; } return odd(n - 1); }
-    int odd(int n) { if (n == 0) { return 0; } return even(n - 1); }
-    int main(void) { return even(10); }